What is a temporary power pole?
A temporary power pole, sometimes called a spider box or construction meter pedestal, is a freestanding pole rigged with a meter socket and breaker panel that gives a job site power before permanent utility service exists. It typically feeds a 200 amp temporary power pole panel down to smaller sub-panels for tools, trailers and lighting. Every installing temporary power pole job in Avondale still needs sign-off from your electrician and inspection before energizing, since we supply and place the pole but the utility connection and permit review belong to licensed trades and the city. Pair it with a temporary power pole placed near your mobile office trailer rental so cords do not cross walkways, and keep portable restroom rental units on the opposite side of the site for cleaner traffic flow.
How much does temporary power pole installation cost?
Temporary power pole installation cost depends on amperage, mounting height and how far the pole sits from the transformer or panel, plus whatever your electrician charges to terminate and inspect it. We do not sell electrical labor, so budget for delivery of the pole itself and separately for a licensed electrician's time. Ask about bundling delivery with other equipment: many Avondale contractors add a construction dumpster rental and standard porta potty rental on the same trip to cut delivery trips. If your project runs past a single phase, compare porta potty rental cost options and monthly porta potty rental terms so sanitation and power both scale with the schedule instead of getting re-quoted separately.
Where should a temporary power pole be placed on site?
Place it close to the panel location your electrician specifies, clear of vehicle paths and delivery routes. A roll-off delivery needs about 60 feet of straight clearance behind the truck, so keep that lane open if a roll-off dumpster rental is coming to the same site. Check the porta potty placement guide logic here too: stable, level ground matters for a power pole the same way it matters for a toilet pad, and OSHA 1926.56(a) sets minimum illumination levels for construction areas, which is often the reason a pole and a light tower rental get ordered together. Keep the pole out of designated egress paths and away from temporary fence rental gate swings so crews and inspectors both have clear sightlines across the Avondale site.
Do I need a permit for a temporary power pole in Avondale?
Permit and inspection requirements for temporary power poles are set by the city and by your utility, and neither is something we track for you. Confirm placement and any inspection steps directly with Avondale before your electrician schedules the tie-in. See dumpster permit requirements and porta potty permit requirements for how similar approvals tend to work on our other equipment.
What amperage temporary power pole do I need?
Amperage depends on the tools, trailers and lighting running at once; a 200 amp temporary power pole covers most mid-size construction sites, while smaller crews sometimes need less. Your electrician calculates the actual load. We just deliver and place whatever pole size your permit and panel call for.
Can Avondale Porta Pros wire the power pole?
No. Avondale Porta Pros handles delivery, placement and pickup only. A licensed electrician has to make the utility connection, terminate the panel and get it inspected before anyone energizes the pole, same as any construction temporary power pole setup.
How far in advance should I order a temporary power pole?
Order as soon as your site plan and amperage are set, since utility scheduling and inspection windows can move fast in Avondale. Booking early also lets us line up delivery with construction site services like fencing, dumpsters and restrooms in one trip instead of several.
What else does a construction site typically need alongside power?
Most Avondale job sites pair a temporary power pole with a portable toilet rental sized to OSHA 1926.51(c) crew counts, a temporary fence rental perimeter, and a handwashing station rental meeting 29 CFR 1910.141(d)(2). Ask us to quote all four together.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.